Talkswitch TS-9112i, Руководство по установке

Страница: 13 / 29

Model TS-9112i Installation Guide 7
Installation and Setup
Desk or Wall Installation
Install on a Desk
Route the cables through the opening in the stand. Attach the stand by
inserting the tabs on the stand into the slots on the bottom of the phone.
Then push the stand towards the phone until it snaps into place. Press
the cords into the grooves provided on the bottom of the stand. This will
allow the stand to sit flat on a desk surface.
Install on a Wall
1. Mount the supplied Telephone Stand to the wall using the two
pre-drilled holes in the stand.
Warning: Ensure that wall anchors and screws are of a sufficient
grade to withstand the weight of the phone and cables.
2. Attach the network and power cable to the phone as specified in section
“Connecting to the Network and to Power”.
3. Attach the handset and headset to the phone as specified in section
“Connecting a Handset or Headset”.
4. Attach the phone to the stand by placing the phone so that the top four
slots on the bottom of the phone line up with the tabs on the stand. Then
push the phone downward until it snaps into place.