VIP3000 Visually Impaired Programmable Thermostat / Customer Information
3
WEEKEND
button is used to set up Saturday and Sunday programmable settings.
The lower button is the
WEEKDAY
button. The
WEEKDAY
button is used to set up
Monday through Friday programmable settings.
Move your finger left about one quarter inch until you find two more half round
buttons one above the other. The top button is the
PROG
button. The lower button
is the
RUN
button. Press the
PROG
button. If you hear
“Program is Off”
the
thermostat is set to run as a conventional thermostat
.
If you hear
“Program is On”
the
thermostat is set to programmable operation. Press the
PROG
button again and
y
ou’ll hear the opposite setting
.
Below the
PROG
button, is the
RUN
button. It’s
pressed to accept program changes and is used much like a computer’s “Enter” key.
Move your finger left one quarter inch until you find two more half round buttons one
above the other. The top button is the
DAY/TIME
button. Briefly press this button
once to hear the current day and time settings. Quickly press it twice to change day
and time to the correct settings. Below the
DAY/TIME
button is the
RESET
button.
Briefly press the
RESET
button if you wish to exit a program setup without accepting
any changes.
Move your finger up about an inch above the panel door until you feel a smooth, two
and a half inch by one and half inch rectangular surface. This is the display screen
for sighted users. All operations that are spoken are also displayed on this screen.
That’s it! For more information about the function of each button refer to
Inside
Panel Door Buttons
and
Case Buttons & Display Screen
in Section 2 below.
SECTION 2: BUTTON FUNCTIONS AND OTHER FEATURES
Now that we’ve reviewed the general layout, let’s go over the function of all buttons
and other features. As each is reviewed, try to locate them on your thermostat.
Inside Panel Door Buttons
Most of the set up buttons are located inside the front panel door. Gently pull the
door down to access the following buttons:
