Edwards Audio
Edwards Audio
is part of
3 Eliot Close, Camberley, Surrey GU15 1LW UK
Telephone: 08456 123388 or 07736 421928 Fax: 01276 613250
email:
website:
www.talkelectronics.com
WORLDWIDE GUARANTEE
There are no user serviceable parts inside, so
please do not be tempted to play or modify any part
of the MC1, as this will invalidate your guarantee.
By registering your MC1 via our website
www.talkelectronics.com/support
your guarantee
will be extended to ten years from the date of
purchase, free of charge.
This entitles you to have the unit repaired provided
that it was originally purchased from an authorised
Talk/Edwards Audio dealer or distributor.
The manufacturer can take no responsibility for
defects arising from accident, misuse, abuse,
wear and tear, neglect or through unauthorised
adjustment and/or repair, neither can they accept
responsibility for damage or loss occurring during
transit to or from the person claiming under
the guarantee.
THE WARRANTY COVERS Parts and labour costs
for ten years (if registered) two years if not, from
the purchase date. After ten years you must pay for
both parts and labour costs. The warranty does not
cover transportation costs at anytime.
CLAIMS UNDER GUARANTEE
This equipment should be packed in the original
packing and returned to the dealer from whom
it was purchased, or failing this, directly to the
Talk/Edwards Audio distributor in the country of
residence. It should be sent carriage prepaid by a
reputable carrier – NOT by post. No responsibility
can be accepted for the unit whilst in transit to the
dealer or distributor and customers are therefore
advised to insure the unit against loss or damage
whilst in transit.
CONFORMANCE
The Edwards Audio MC1 has been manufactured to
conform with the protection requirements of the EC
Council directive 89/336/EEC relating to EMC by
application of the following standards:
EN500811 1997 Emissions Standard.
EN500821 1997 Immunity Standard.
and also the requirements of the EC low voltage
directive relating to electrical safety by application of
the following standard:
BSEN/IEC60065: 2002 International Safety
Standard. For the purposes of testing the MC1 was
used with the high quality interconnects supplied by
Merlin Cables. Compliance with the above
standards may only be made if the unit is installed
as per this manual and using the correct cables.
SPECIFICATIONS
Max Input MC ................................................ 9.8mV
Max Gain MC input (MM) ......................58dB(36dB)
THD Distortion ..........<0.006% 1kHz <0.02% 20kHz
Signal to noise ..............................-68dB AWeighted
RIAA ................................................... within 0.25dB
Frequency response........... 1 0-100kHz within 0.3dB
Stereo separation better than .......... 55dB 20-20kHz
Input Loading MC...............................100R with 2n2
Input Loading MM.............................47K with 120pF
Output impedance ................................... <10 Ohms
Max output level ............ 4.9v depending upon input
Dimensions WxHxL .. 114.5mm x 47.5mm x 160mm
Weight ............................................................. 0.5kg
PSU
Max output ...............................................+/-18V DC
Power consumption (Max) ..................................3W
Voltage................................................115/230v AC*
* Units are supplied with correct PSU for country of
destination when originally shipped
All
Electronics products are designed and manufactured in the UK using
as many locally made parts as possible
Содержание Edwards Audio MC1
Страница 3: ...Diagram 2...
