Talk-a-Phone WEBS-PA-1, Руководство по конфигурации и эксплуатации

Страница: 36 / 60

Operations
36 Talk-A-Phone Co.
7 Operations
The Communications Module takes approximately one minute to boot.
The Communications Module needs to be programmed in accordance with the instructions provided
in Chapter 4 (Refer to 4 Using the Web GUI).
7.1 Activating/Deactivating Auxiliary Outputs
To provide additional visible or audible alerts upon an event, the Communications Module is equipped
with three Auxiliary Outputs. The Auxiliary Outputs can be used to connect devices such as a relay,
siren, a strobe light, and a PTZ camera. These devices can then be activated during an active mass
notification/page.
7.2 Paging Operation
The Communications Module can receive one-way paging messages from the WEBS Contact
®
Server and output the paging through the line level output. The Communications Module must be
registered with the WEBS Contact
®
Server in order to receive incoming pages.
7.3 Rebooting the Communications Module
The WEBS-PA-1 can be rebooted using the Reset button (Refer to 2.1.2