`TALEX Spółka z ograniczoną odpowiedzialnością
ul. Dworcowa 9c, 77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.:
Page
14
of
36
4.
Intended Use
TALEX sweeper is used for removing impurities formed on all paved surfaces. Ideal for sweeping
squares, traffic routes and car parks, which are covered with paving stones, asphalt or concrete.
The possibility of installing to a lift truck, tractor or loader allows to use it in agriculture,
horticulture, as well as municipal companies and industrial plants.
Using the machine in other conditions will be construed as improper. Strict compliance with the
requirements for the use of the machine, maintenance and repair according to the
manufacturer’s recommendations is a condition for the intended use.
The machine should be operated, serviced and repaired only by persons familiar with its specific
characteristics and the rules of conduct in terms of safety.
Accident prevention regulations and all basic rules of work safety and hygiene, as well as traffic
rules should always be followed.
It is forbidden to use the bucket sweeper contrary to its intended use, or without
reading the manual.
5 Equipment, construction and operation
5.1
Standard equipment
In addition to the complete machine, the basic equipment of the bucket sweeper contains:
User manual,
Spare parts catalogue,
Warranty card.
The main components of the bucket sweeper are: brush, bucket and body. They are connected by
pins or bolted together.
