Talex PROFI CLEAN 2800, Руководство пользователя, Страница: 9 / 39

Talex Spółka z ograniczoną
odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c , 77-141 Borzytuchom
tel.
(59) 821 13 40
e-mail biuro@talex-sj.pl
www.talex-sj.pl
Page 9 of 9
4.4 Transporting the sweeper

When driving a vehicle with the sweeper attached, but not working, ensure the safe
transportation height of ~ 0.3m.

Take special care when driving on public roads, and comply with the applicable road
traffic regulations.

The transportation speed should be adjusted to the condition of a road surface, it should
not exceed however 20km/h.

It is forbidden to carry persons or objects on the machine.

Do not leave the vehicle with the sweeper on a hillside or other sloping surfaces,
without securing the vehicle from rolling down. Place chocks under the wheels of the
vehicle and apply the parking brake. Leave the machine when stopped.

Check the technical condition for safety, in particular the elements of the suspension
system and of the hydraulic system.

Reckless driving and excessive speed can cause an accident.
4.5 Maintenance

When commissioning and transporting the sweeper, inspect its technical condition to
check for damage.

It is forbidden to stand under the raised sweeper, as this may result in being crushed by
the machine.

Take care to with unbuttoned, or loose items of work clothes during the operation,
assembly, disassembly or adjustment. Keep them away from components that could
snag them.

Due to normal wear, check the condition of bearings, screw connections, hydraulic
system components.

Before carrying out any work on the hydraulic system, the residual oil pressure must
be eliminated.

Any modifications of the sweeper exempt the manufacturer from liability for any
resulting damage or injuries.

No work (maintenance or repair) is allowed under the raised and unsecured machine.

Observe the general health and safety rules.

Any repair, maintenance and cleaning work shall only be carried out with the ignition
key removed from the vehicle's ignition switch, the parking brake applied and secured
against access by third parties.

When replacing parts, use only the original parts of the manufacturer, who does not
bear any responsibility for the use of non-original parts.

In case of any work requiring the sweeper to be lifted, use only certified mechanical or
hydraulic lifts intended for this purpose. Having lifted the machine, use additional
stable and durable supports. It is not allowed to work only under the suspension