Z-908 EKO SHREDDER
Page
5
2.4.
Warranty
Warranty terms are provided in the warranty form. The careful lecture of this document is one of the
obligations of the operator. The failure to comply with the regulations on proper exploitation of the device will
lead to the decrease in its performance, increase in the malfunction risk, and the fact of the warranty being
deemed null and void. The warranty will be specifically cancelled in the following cases:
1. Identifying mechanical damages caused by disregarding the indications of the manual on proper
operation, especially
– by mowing while on the reverse gear.
2. Fixing the device by servicing companies other than the Selling Party, Producer, or a company
suggested by the said parties;
3. Using unoriginal parts while repairing the shredder;
4. Modifying the construction of the device.
3.
GENERAL PRECAUTIONS AND WORK SAFETY
The majority of accidents occurring while using, operating, or transporting the device results from the failure
of the operator to comply with basic safety precautions. It is of significant importance for the user to make
use of the recommendations provided below and follow them as strictly as possible:
3.1.
General precautions
1.
FOLLOW
the recommendations of this publication, as well as general work safety principles!
2.
OBSERVE
safety indications and symbols located on the device. They have been placed there for
user’s safety!
3.
IT IS FORBIDDEN
to use the machine without the required covers attached. If they have been
damaged, replace them using original components.
4.
SHREDDER SHOULD BE USED
after reaching the nominal PTO (power take-off) rotational speed of
the tractor. For "URSUS" C-360, C-385m tractors, as well as the ones with a bigger engine, the said
speed is equal to 540 RPM. Moreover, the rotational velocity of 600 RPM should not be exceeded.
5.
UNDER NO CIRCUMSTANCES
should the machine be inspected or repaired while some parts are still
moving. It is highly recommended to wait for them to stop before attempting to inspect the device.
Avoid wearing clothes that may be easily torn apart by the moving components of the shredder.
6.
UNDER NO CIRCUMSTANCES
should the operator leave the working machine unattended.
7.
Make sure that there are no unauthorized individuals or animals in a close proximity to the device
before its use, as well as during its exploitation.
It is strictly forbidden to use the shredder while
non-operators are within less than 50 m from the device!
8.
IT IS FORBIDDEN
to climb on the machine.
9.
FIELDS OR MEADOWS
should be properly prepared for the use of the shredder
– all the bigger rocks
and hard objects should be removed.
10.
SHREDDER
must not be used while reversing.
11.
TRACTOR
used should incorporate driver’s cabin.
12.
IT IS STRICTLY FORBIDDEN
to stand between the tractor and the machine until the shredder is
secured against detaching involuntarily by using the handbrake or locating chock under its wheels.
13.
POSITION
of the hydraulic lift lever should be changed only by the operator sitting in the driver’s cabin
of the tractor.
14.
CHANGING
the position of the lever from the outside of the tractor is not allowed.
15.
IT IS NOT RECOMMENDED
lifting the machine by means of the hydraulic lift of the tractor when its
engine is on and the working shaft is still rotating.
16.
USING
the shredder on slopes up to 30
o
is safe.
3.2.
Transportation
Before setting the shredder in the transporting position, make sure that the PTO of the tractor is on and
all moveable parts are stopped.
BE EXCEPTIONALLY CAREFUL
while transporting the machine along public roads; follow traffic
regulations. Moreover, for the transportation period, attach a signaling device and a triangular warning
plate to the device.
