Talet Equipment Mini Auger Bucket, Руководство по эксплуатации и частям

Страница: 4 / 18

Safety Precautions
• When using the auger bucket, be sure that the proper weight of the load is not
too heavy. A light load sticking out too far can have the same tipping effect on
the loader as a heavy load carried too close.
• Do not attempt to dig with the auger bucket. If scraper blade is installed, scoop
from loose piles only.
• Do not obstruct your vision when traveling or working. Carry the Pauger bucket
low for maximum stability and visibility when traveling.
• Operate at speeds slow enough so that you have complete control at all times.
Travel slowly over rough or slippery ground and on hillsides.
• Avoid steep slopes or unstable surfaces. If you must drive on a slope, keep the
load low and proceed with extreme caution. Do not drive across a steep slope
under any circumstances. Drive straight up and down the slope.
• Avoid turning on an incline, if at all possible. If it is necessary, use extreme
caution and make the turn wide and slow with the bucket carried low.
• Never operate the bucket when people are standing by the bucket and cold be
injured by the auger.
• Never heap load heavy material where the combined weight of the bucket and
the material could exceed the rated capacity of the loader.
If you can't see where you are going then stop.
Skid-steer Loader Safety
1.Read the entire skid-steer loader operators manual before ever attempting to
use the skid steer loader. This knowledge is necessary for safe operation.
2.Follow all safety decals on the skid-steer loader. Keep them clean and replace
them if they become worn and hard to read.
3.Know the limitation of your equipment. Do not use equipment for anything
other than what it was originally designed for.