2
Thank you for purchasing the Talent PS215M4 Portable Powered PA Speaker Package. The PS215M4 provides a big
sound and many features of a full-size PA system in a very lightweight, grab-n-go format. A variety of input options includ-
ing mic, line, MP3 and Bluetooth make the PS215M4 perfect for a wide variety of applications, and the built-in LED light
show adds an exciting splash of color to your performance or presentation.
WARNING:
When using electrical products, basic cautions should always be followed, including the following:
1. Read all instructions thoroughly before operating this device.
2. Keep these instructions for future reference.
3. Pay attention to all warnings and follow all instructions as outlined here. Failure to do so can result in injury to yourself or
others, and/or damage to your equipment.
4. Do not use this device near water or in environments with high humidity, or anywhere it can become wet.
5.
6. Clean only with compressed air, and/or a dry cloth.
7. Do not cover any of the ventilation openings or the heatsink.
8.
that produce heat.
9. Do not remove or bypass the grounding-type plug on this device. The plug has two blades and a third grounding plug, pro-
for replacement of the obsolete outlet.
10. Protect the power cord from being walked or driven on, from being tripped over, or from being otherwise compromised in any way.
11.
used, use caution when moving the cart/device combination to avoid injury from tip-over.
12.
ble, and level surface.
13. Unplug this device during lightning storms or when unused for long periods of time.
14.
power cord or plug is damaged, liquid has been spilled or objects have fallen into the device, the device has been exposed
to rain or moisture, does not operate normally, or has been dropped.
15. Do not open this device’s case; there are no user serviceable parts inside.
16. Never break off the ground pin. Connect only to a power supply of the type marked on the unit adjacent to the power cord.
17. This device is sold with a standard U.S.-style IEC power cord. For use in other areas a different kind of cord may be required,
and may be purchased locally.
18. The on/off switch in this unit does not break both sides of the primary mains. Hazardous electrical current can be present
inside the chassis, even when the on/off switch is in the off position.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
