Takuma RS wing Скачать руководство пользователя страница 2

/

 21 

EN

Thank you for choosing the

 TAKUMA RS WING

Make sure you are able to use this product in a safe and responsible manner. Do not use 
it if you are not in good physical health, if you are not an experienced swimmer, or if you 

are under the influence of alcohol, drugs or medications.

The use of a RS WING exposes you and others around you to serious risks. It is recommended 

to take lessons by a certified instructor before using this product on your own.

Always make sure you are using this product at a safe distance from others and away 
from any obstacles. Check for any legal requirements and rules that may apply in your 
location. Observe local weather forecasts and never go out in sea or weather conditions 
that are above your level of physical ability.  Do not use the RS wing in a thunderstorm 
or severe weather conditions.

The following are required when using your RS WING on water:

 

 

a certified personal flotation device (PFD) 

 

 

a leash

 

 

a certified helmet

 

 

a full neoprene wetsuit, booties and gloves

By using this product, you agree that you do so at your own risk. TAKUMA does not accept 
any responsibility for personal injury or material damage in the case of an accident due 
to incorrect use.

Assembly video tutorials

Содержание RS wing














Отзывы: