5
USER GUIDE
EN
Once the battery is connected
to the charger, the light on the
charger should turn red.
Once the battery is fully
charged the light will turn green
again, you can disconnect the
battery from the charger.
To do so, unplug the charger
from the wall socket then put
back the protections on the
connectors after ensuring there
is no water or humidity inside.
The charger and the battery
should be stored in a dry clean
circumstance.
Do not leave the charger
plugged when not used.
Battery Indicator
While charging, you can check
the progress on the battery:
• 1 BLUE light flashing = less
than 20% charged
• 2 BLUE lights flashing = more
than 20% charged
• 3 BLUE lights flashing = more
than 40% charged
• 4 BLUE lights flashing = more
than 60% charged
• 5 BLUE lights flashing = more
than 80% charged
When the battery is fully
charged all the led will turn off.
Check battery status
To check the battery status
when it is not charging just
press the power button briefly
• 5 BLUE lights ON = fully
charged
• 4 BLUE lights ON = more than
80% charged
• 3 BLUE lights ON = more than
60% charged
• 2 BLUE lights ON = more than
40% charged
• 1 BLUE light ON = more than
20% charged
• 0 BLUE light ON = Less than
20% charged - Battery is not
powerful enough to make you
fly. Time to stop using your
E-FOIL and charge your battery
Assembling your E-FOIL
Preamble
Apply TEF GEL on all screws to
avoid corrosion.
Wing
To set up the wing of your e-foil,
prepare the three screws (M6
18mm) of the front wing and the
two screws of the stabilizer wing
(M6 16mm) and the 3 screws
for the mast (M6 30mm)
Slide the front wing onto the
front of the fuselage with the
winglets up and towards the
