Takstar XY0-1 SET, Руководство пользователя

Страница: 53 / 60

■ Troubleshooting
A. Cannot power on device
Make sure that the device is connected to the power supply through the adapter.
B. Device is not recognized by computer
1. Make sure that the USB cable is properly connected without any damage on
it. Try using a new functioning USB cable, preferably one less than 3m long.
2. The USB port is not activated in the system (please check the "Device
Manager" in Windows system).
3. The USB cable is not fully plugged in or is in a wrong interface.
4. The device is not connected to the power supply.
5. Driver is not installed properly.
C. No sound
1. Check if the device volume knob is turned too low; try adjusting it back to
normal level.
2. Check if the playback software is playing normally; try closing and re-starting
it.
3. Check if the audio device is disabled.
4. If either the software or hardware sound is missing, check if the
software/hardware monitor knob is turned to INPUT or PLAYBACK position.
Try adjusting it and see if the sound is back.
5. Check if the microphone and speaker is properly connected to the device in
accordance with the connection diagram.
6. If using a 48V power supply condenser microphone, please check whether the
"48V" switch indicator is on.
7. Check if the headphone is connected properly; try unplugging and re-
plugging in.
8. Check if the audio device is selected as the current device. Please refer to
instructions on system audio settings and selection on playback software
audio device.
9. Check if there are other USB devices connected to the computer; try
unplugging them to see if the sound is back to normal.
10. Check if there are any conflicting programs running; try closing them to see if
the sound is back to normal.
52
PRO RECORDING/WEBCAST KIT
SET