Takstar WDA-700, Руководство пользователя

Страница: 16 / 20

Sketch map ③
Function Sketch Map of Transmitter Panel
Power on/off and volume control: Turn down the knob , you will hear a sound “Da” , indicator will light,
it means the transmitter is powered on. Turn the knob to MAX direction for increasing the volume, turn the
knob to MIN direction for decreasing the volume until power off
Indicator: shows the working status
No light: means power off
Permanent green light: means full of power, when recharging it means fully charged
Flickering green light: means at mute status
Flickering red light: means running out of power, need recharging in time
Permanent red light: means under recharging
DC socket: plug in the supplied DC 5V/350mA adaptor into the socket for recharging
Battery compartment: built-in 3.7V/950mAh lithium ion battery
Mute switch: press the button for switching the MUTE function
MIC IN socket: plug in the headworn/tie-clip microphone into this socket
Infrared frequency pairing window: match the frequency with receiver before using. Turn on the transmitter,
point the infrared frequency pairing window to the receiver infrared frequency pairing window , when
the indicator lights, it means frequency pairing is finished. (Remark: the frequency pairing should be done
within 5 meters, to avoid howling, please set the transmitter at low volume during frequency pairing. Adjust
the volume after frequency pairing is finished.)
Antenna
Body pack clasp: for fixing the transmitter on waistband or straps
Hanging clasp: fasten the supplied rope on the hanging clasp for shoulder hanging or front hanging
14
18