Takstar WDA-1200, Руководство пользователя

Страница: 10 / 13

1.Power ON/OFF
Power ON: install two 1.5V AA batteries, press the Power button to turn on the microphone, or press
and hold the Power button to turn off. (DO NOT install the batteries in wrong direction)
2.Switch Frequency
Noise during use, short transmission distance and
pickup of other wireless microphone signals may
be the results of frequency interference, which can
be avoided by switching frequency. Instructions:
when powered on, press Frequency Switch button
to select a desired frequency (16 channels in total).
Receiver on the speaker will auto sync when
frequency is switched. To select other channel,
repeat the above steps. (If the interference issue
remains, try the steps in below Instruction 3.)
3.ID Lock / Sync
First, turn off the speaker and the microphone.
Press and hold the Sync button, then the Power
button as well until the LCD screen flashes for 2s.
Turn on the speaker power, after 3s, press the
Sync button on the wireless mic to complete
syncing. Sync/Lock is successfully when the
Wireless Mic Indicator on the speaker is lit.
One microphone can sync with multiple speakers,
in other words, the speakers will receive signal
from this microphone. To un-sync with a speaker,
simply sync with another desired speaker at a
different frequency. In case your microphone is
broken and a new one is replaced by the
manufacturer, follow these steps to sync.
Capsule
Battery Display
Power Button
(ON: press;
OFF: press & hold)
Frequency Switch
/ Sync Button
Battery Holder
Signal Display
Frequency
Display
Bottom Cover
Wireless Microphone User Instructions
4.Microphone Factory Reset
When the batteries are not installed, press and hold Sync button until you have installed the
batteries. This will reset the device to factory defaults. (Pair with your speaker after reset)
5.Battery Status
When the battery icon flashes on the LCD display, it’s time to prepare new batteries. When the
icon turns from bright to dark and bright again, or the whole LCD is flashing, please change the
batteries timely as that they are now dry and cannot properly power the microphone any more.
6.Cautions
1) Place the microphone out of reach of children.
2) Take out the batteries when the microphone is not used.
3) Do not randomly press setting buttons during normal use.
4) Please replace the batteries when the microphone automatically turns off.
09