Features
Specification
Frequency Response Curve
Hypercardioid
(at 1kHz)
0
°
330
°
300
°
240
°
210
°
30
°
60
°
90
°
120
°
150
°
180
°
270
°
Frequency
Response
Graph
-80
Dear Customer,
Thank you for purchasing TAKSTAR TA-60
Please read the user manual before operation.
If you have any question or suggestion, please dial contact us.
dynamic microphone.
○
○
○
○
○
Rugged
zinc
alloy
structure
and
metal
grille
,
fashionable
and
durable
design
Super
cardioid
pickup
,
pop
-
noise
-
resistant
design
,
low
feedback
and
high
gain
Capsule
shock
mount
design
prevents
handling
noise
and
ensures
the
excellent
pickup
effect
Wide
frequency
response
,
natural
reproduction
without
distortion
Magnetic
-
reed
switch
design
prevents
ON
/
OFF
surge
noise
and
protects
the
rear
equipments
○
○
○
○
○
○
Transducer
Principle
:
Dynamic
Polar
Pattern
:
Super
cardioid
Frequency
Response
:
60Hz
-
18kHz
Sensitivity: -51dB±3dB (0dB=1V/Pa at 1kHz)
Output Impedance: 350Ω±30% (at 1kHz)
Net
Weight
:
350g
Professional Dynamic Microphone
speaker
microphone
audio source
mixer
XLR
microphone
button
microphone cable
※
The product specification is subject to change without prior notice.
1. When connecting the
microphone with cable, match the XLR
connector with the 3 pin on microphone, then insert fully till the
XLR lock button fixes the position.
2. When disconnecting the microphone with the cable, press the XLR
lock button, then take out the cable.
3. Connect the other end of the cable with the equipments, e.g. mixer,
power amplifier, sound card
.
4. Reduce the equipment volume before operation, then adjust the
volume to a proper level to avoid speaker damage by the sound
pressure surge.
5. Do not hold the microphone grille. Keep the microphone away from
the speaker as much as possible and avoid the capsule pointing to
the speaker to prevent from feedback
.
Installation
To avoid personal injury or property loss caused by electric shock,
over temperature, fire, radiation, explosion, mechanical risk and
improper use, please read carefully and abide by the following
items before operation:
1. Please check if the power of the connected equipment matches with
that of this product before operation. Adjust the volume to proper
level during operation. Do not operate at over-power or high volume
level for a long time to avoid abnormal functioning or hearing loss.
2. If abnormal phenomenon (smoke, abnormal smell) happens, please
turn off the power switch and disconnect the power plug with power
socket, and send the product to local dealer for maintenance.
3
.
The product and accessories should be put in dry and ventilated
place rather than humid or dusty environment. Prevent the product
from fire, liquid, rain, water, over-colliding, throwing, vibrating, vent
hole covered to avoid function damage.
4. When the product needs to be installed on wall or ceiling, please fix
it tightly to avoid dropping risk.
5. Please abide by safety rules during operation. Do not use the product
in the place prohibited by regulation or law to avoid accident.
6. Do not disassemble or repair the product by yourself to avoid
personal injury. If you have question or need service, please contact
the local dealer.
Caution
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel: +86 752 6383644 Fax: +86 752 6383952 Website:
www.takstar.com
E-mail: [email protected]
TA-60
