Takstar PH 200, Руководство пользователя

Страница: 30 / 36

29
A. LED does not light up after the microphone is turned on.
1. Check if the microphone has sufficient power, try to recharge it and then
use it.
B. No sound when playing music
1. Check if the microphone has connected with the cell phone successfully.
2. Check if the earphone has correctly connected with the microphone
connector.
3. Check if the cell phone has played sound normally, or exit the software,
turn on it to play again and check the result.
4. Check if the cell phone volume has been decreased. Try to increase the
cell phone volume and check the result.
C. The microphone sound can not be monitored
1. Check if the microphone has connected with the cell phone successfully.
2. Check if the microphone is turned on.
3. Check if the microphone volume has been decreased, try to increase the
volume and check the result.
D. The recorded sound has no reverb effect
1. Check if mic is connected with cell phone/PC well. Reconnect and check
the result.
2. If the cell phone connecting cable has been connected with the
accompaniment input connector, it will cause no reverb of the recorded
sound. Disconnect the connecting cable and then restart the cell phone.
E. The microphone sound can not be recorded or the recorded sound
volume is too low
1. Check if the microphone volume has been decreased, try to increase it
and check the result.
■ Trouble shooting