recording volume of microphone is too low but
accompaniment is too loud?
Increase the monitoring main volume and monitoring computer waveform
volume by about 50-70% and vice versa.
volume is normal on local side, but small on the
other side? How to adjust when the volume is small on local side, but normal
Increase
ncrease
the recording sum volume by about 50% to increase the volume on the
other side; i
the monitoring main volume by about 50%-70% to increase
the volume on local side.
Press the recording sum control button, then on the other side only the
microphone sound can be heard and vice versa. This function is also suitable for
post-production.
Generally, the treble, mediant, bass of equalizer is set at a position of 12-14
o'clock, which depend on different voice condition and microphone features;
when the treble and bass is set at the minimum and mediant is set at the
maximum, the sound effect is near to the telephone voice effect.
The type of 16-18 effect is large room effect. It is suitable for karaoke. The effect
strength should be adjusted to about 30%-50%. The console offers 100 optional
effects; you can adjust according to personal interest.
What you hear is the sound with effect; what you record and transfer to the
other side of the network is the sound without effect. This function can be used
for professional recording or karaoke score test.
Yes. The console has line in/out interface and was supplied by 5V/1A USB
interface power adaptor. Connect the DVD palyer to line in interface and connect
the power amplifier to line out interface, and then connect the power amplifier
H.
How to turn off quickly when you don't want your voice to be heard on the
other side of the network?
Turn the recording sum volume to the minimum when it is bounced; turn the
microphone volume to the minimum when the recording sum button is pressed
down.
I.
How to adjust when the recorded reverberation sounds is not full?
Increase the monitoring microphone volume, usually to about 30%-50%. It
depends on personal requirement.
J.
Why the music can't be heard when the main volume and computer
waveform is normally turned on?
Please check if the small speaker on the right corner of the computer is in mute
state, if yes, turn on the speaker.
K.
Why the voice can't be recorded into the computer when the recording
sum control is normally turned on?
Please check if the recording microphone option of small speaker on the right
corner of the computer is in mute state, if yes, turn on microphone option
Caution
Press 48V power supply button when using professional condenser. If there is no
sound, please check if 48V power supply indicator is light or the monitoring
master volume or microphone volume is turned on. Otherwise, there may be
something wrong with the sound card power supply. Please repair it in time.
Turn down the monitor master volume to the minimum before plug in or out the
microphone to avoid the sound equipment being damaged.
Turn down the effect strength and monitoring microphone to the minimum
volume when play the recorded voice.
When the console is working and powered by the supplied adaptor, if you would
like to connect the console with computer directly, please wait for five
minutes after the adaptor is plugged out.
Do not dismantle or change the inner construction of MX-620 network
karaoke console by yourself lest trouble occur.
Turn off 48V phantom power supply if the console is connected with
dynamic microphone or handheld microphone with built-in battery to
avoid the microphone being burnt.
WARNING
WARNING
Operation
Tips
A.
How to do when the
B.
How to adjust when the
on the other side?
C.
music can only be heard on local side?
How to make sure the
D.
equalizer?
How to adjust the
E.
is suitable for karaoke?
What effect and volume
F.
effect and recording without effect? When this function
What is listening with
will be used?
G.
for family karaoke without computer but DVD, power
amplifier and audio system?
Can we use the console
to the audio system.