Features
Caution
Product Content
Application
Medium or small banquet hall, multifunction hall, large conference room
1. To ensure installation safety, the full range speaker cabinet quantity can not be more than 20 on one side.
2. Make sure the power and impedance of speaker cabinet match with that of the power amplifier, otherwise it leads to equipment damaged
or bad sound.
3. Ask professional technician for installation.
4. During operation, keep the horn toward the audience for better effect.
5. Handle with care during transportation.
6. After operation, fix the connection bar and pin on the cabinet to prevent from losing them.
1. Connect one ECA-032 with another ECA-032 via connection
parts at three points. Use the pin to adjust vertical angle 0°-10°
in 6 steps (refer to figure 1).
2. Connect ECA-032 with the subwoofer ECA-081SUB at three
points. Use the bolt to adjust vertical angle in two steps (refer to
figure 2).
3. Four full range speaker cabinets can be installed as a group
in a parallel way via 3 cables, 4Ω impedance after connection.
It is recommended to use one channel of power amplifier
EKA-3A/3D/403/403D for one group of speaker cabinets.
ECA-032 speaker cabinet ×2
User manual×1
Dear Customer,
Thank you for purchasing ECA-032 line array full range speaker cabinet which used with ECA-081SUB subwoofer together. ECA-032
features compact contour, easy installation and adjustment, clear and delicate sound.
Please read the user manual carefully before operation and keep it for reference in future.
ECA-032 Line Array Full Range Speaker Cabinet
Installation
The line array is designed with 3 inch 20mm cone MFHF and dual 25mm silk dome tweeter. The woofer features elastic and durable rubber
surround for quick and dynamic MFLF, symmetric magnet circuit for low harmonic distortion. The tweeter features transparent silk
diaphragm for flat and bright treble, NdFeB magnet for light weight and slender but detailed treble. The magnet loop is filled with magnet
liquid to reduce the voice coil temperature and meanwhile boost the reliability. Specific directivity horn is designed together to effectively
control the vertical audio projection range
The crossover is designed with low consumption OFC inductor and high quality polypropylene for reliable performance and prominent sound
The trapezoidal enclosure is designed with acoustic foam to eliminate standing wave but boost the pure MFLF and flat frequency response.
The compact enclosure is connected via Al pieces, vertically 0°-10°adjustable in 6 steps. The speaker cabinet quantity and projection angle
can be adjusted according to the actual installation requirement
Linear audio source, even horizontal coverage, strong vertical directivity, low attenuation in the projection range
Specification
Rated Power: 40W
Rated Impedance: 16Ω
Frequency Response(±3dB): 100Hz-20kHz
Sensitivity(1W/1M): 92dB
Coverage: H120°×V45°
Max SPL: 108dB
Crossover Mode: two way passive
Crossover Frequency: 2500Hz
Suspension/Installation: flying suspension, vertical 0°-10°adjustable
Wiring: 2×NL4speakon(IN1+, 1-，LINK1+, 1-)
Enclosure: 5mm+9mm+15mm plywood
Finish: white painting
Tweeter: 1″×2(25mm)，silk dome
Woofer: 3″×2(20mm)，70 magnet
Dimension(mm): 302×167×112mm(W×D×H)
Net Weight: 2.4Kg
Figure 1
Figure 2
ECA-032
pin connection hole
C-C vertical angle 5°
C-B vertical angle 0°
ECA-081SUB
5°
0°
B C
C
ECA-032
ECA-032
A-1 vertical angle 9°
A-2 vertical angle 6°
A-3 vertical angle 0°
B-2 vertical angle 10°
B-3 vertical angle 4°
C-3 vertical angle 8°
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang YiRd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel: 86 752 6383644 Fax: 86 752 6383952 Email: [email protected] Website: www.takstar.com
