Takstar E300W, Руководство пользователя

Страница: 16 / 20

E300W
Portable wireless ampli fi er
Operation
15
A . Frequency Matching
1 . Matching steps
It has the factory setting . If there is no interference , do not matching frequency
or change frequency .
① Power on the headset mic, wait until the screen shows channel status. Long
press micM button for 5s until a circle appears on the screen. Then
immediately power on the amplifier and wait until the circle on mic screen
changes to channel number.Speak to the mic to test. If your voice is amplified,
the devices are paired successfully.
② Speak to the microphone but no sound . This means the matching is not
successful . Match again .
2 . Changing Frequency
Power up both the amplifier and the headset mic. Press M button on mic, and
the screen should flicker. Then press or long press /- button to change
frequency gradually/rapidly, and the display will show respective frequency
channel changes.
3 . Multiple units used at the same time
① Use the first matching method to link and then change frequency
.
② Make sure to use different channel on each device to avoid interference.
B . Bluetooth Matching
For the fi rst time operation , you need to match the bluetooth of cell phone or
other equipment according to the steps below :
1 . Turn on the power switch of the ampli fi er and press the M butt on . When the
display shows “ bLUE ” and the sound prompts " Bluetooth mode ".
This means the Bluetooth matching status .
2 . Enter into the cell phone setting menu and turn on the Bluetooth function ,
and then search TAKSTAR E300W . Click TAKSTAR E300W for connecti on . The