
11
Operation Instructions
I. How to Use
1. Wear the headset mic on your head correctly, and adjust the pickup angle
of the mic.
2. Insert the ø3.5mm plug of the wired headset mic into the MIC input interface.
3. Power up the voice amplifier (LED lights up blue) and adjust the volume to
an appropriate level.
4. If the power indicator flashes red and blue during use, it means that the
battery is running low and requires charging in time.
Tips: It's recommended to fully charge the device upon first use, and if not
used for long periods, charge it for once every six months to avoid battery
over-discharge which could affect battery performance.
II. Bluetooth pairing
Upon first use, you need to connect this device to your phone or Bluetooth
device, following below steps:
1. Power up the amplifier, press [M] to switch to Bluetooth mode and start
Bluetooth discovery and pairing, indicated by a flashing blue LED.
2. Enter SETTINGS menu on your phone, find and enable Bluetooth, wait until
"TAKSTAR E20" is discovered and tap on it to connect. When connected
successfully, there will be a voice prompt about Bluetooth Connected .
Devices such as cell phones, laptops, tablets, and iPads can play music via
Bluetooth thereafter.
3. The next time you switch to Bluetooth mode, the amplifier will
automatically connect to the previously paired device, signaled by a voice
prompt Bluetooth connected . When Bluetooth is connected, press [M] to
disconnect Bluetooth and switch to the next work mode.
"
"
"
"
VOICE AMPLIFIER
E20
Содержание E20
