Keep the Power Supply and Bar dry and clean. Each power supply is supplied with two jack covers and
these should remain in place when the jack is not being used. Avoid exposing the system to moisture
or solvents of any kind. Dust and other contaminants can be removed by using a soft cloth by itself or
along with a gentle, general purpose cleaner.
Remove dust and other contaminants from the Bar taking special care around the emitter points. If
need be, a cleaner for use with ABS/PVC and aluminum can be used sparingly. If cleaners are used
make sure the Power Supply and Ionizing Bar are dry before operating them.
SERvICE
In the event of equipment damage or failure, call the factory for service or repair, 513-353-4306 or
800-792-8255.
CAUTION: There are no field serviceable parts on the system. Outside of cleaning, do not attempt to
service or repair the system. Personal shock and/or damage to the system could occur. Any attempted
field service or repair will void the Warranty.
WARRANTY
All TAKK products are engineered and designed with optimum serviceability in mind. Quality of materials
and labor are foremost in the manufacture of our products. In the event that there is any premature failure
of our system, the Ion Edge is guaranteed against any factory defects in materials and/or workmanship for a
full
24 months
from the date of purchase. Any equipment found to be defective by a qualified TAKK service
technician will be repaired or replaced at TAKK’s cost. Any special handling or shipping the customer may
request is not covered under this warranty.
All Warranties are void if the equipment has been damaged due to negligence, misuse, or any other event
outside of the control of the manufacturer.
Call the factory before returning any equipment under Warranty, 513-353-4306 or 800-792-8255.
hEALTh AND SAFETY
The Ion-Edge has been engineered for safe and user friendly operation. Please operate this system safely by
observing the following:
The Model 200 Power Supply is a High Voltage source.
Do Not
attempt to dismantle or tamper with the unit.
Personal electrical shock and/or damage to the unit may occur.
The Power Supply
must not
be operated under any circumstance with the housing lid removed or when the
housing is damaged in anyway.
DO NOT
operate the Power Supply without the unit being electrically grounded. A grounded power cord has
been provided with the unit and should be used at all times with a grounded outlet or control box.