1
Digital CCD Color Camera
Instruction Manual
TMC-734D
● We greatly appreciate your confidence choosing our TAKEX CCD Video Camera.
● Please read this manual carefully before use and manage the camera properly.
Keep this manual at hand and reread it whenever you are uncertain about the operation.
Precautions for use
・
Use the equipment with a voltage within the range of specifications(12VDC
±
10%).
・
Do not use the equipment in an environment subject to water damage as TMC-734D is a indoor
type camera. Always use a protecting case like outdoor camera housing when in outdoor use.
・
Do not make an impact on the equipment.
・
Do not disassemble this equipment or alter the internal circuits. We assume no responsibility
whatsoever for any incidental damages resulting from the user
’s use of this equipment or
performance failure.
・
Be careful not to get the light receiving surface be exposed to high intensity light over a long
periods of time. If a right receiving surface is exposed to high intensity light over a long time
(regardless of the on/off state of the camera), the image pickup device may get discolored or get
burnt in.
・
When the camera is used under a fluorescent lamp or a mercury lamp, it may cause a perceptible
flicker or a periodic chromatic color change. However it is not the camera-related failure.
・
Do not use the equipment in an environment subject to intense electromagnetic field.
In such an environment, malfunction of the camera, disturbance of image and noise are caused
by the field.
・
Do not directly input power to VIDEO OUT terminal, it causes the equipment to malfunction.
・
Do not make a wire connection with a wet hand. It creates a shock hazard.
・
When an abnormal or failure condition is detected, immediately stop using this equipment, cut off
the power supply, remove the external connection cables and contact the dealer for
inspection/repair.
Component parts
Please be sure to check the following items before use.
Camera component
Camera
Hex wrench
Lens cap
Iris connector
DC plug
