Instruction Manual
1
PARTS DESCRIPTION
PRODUCT DESCRIPTION
2
DO'S AND DON'T'S
PB-30SU
PHOTOELECTRIC BEAM SENSOR
We appreciate your purchase of a TAKEX photoelectric beam sensor. This sensor will provide long and dependable service when
properly installed. Please read this Instruction Manual carefully for correct and effective use.
Please Note : This sensor is designed to detect intrusion and to initiate an alarm ; it is not a burglary-preventing device.
TAKEX is not responsible for damage, injury or losses caused by accident, theft, Acts of God ( including inductive
surge by lightning ), abuse, misuse, abnormal usage, faulty installation or improper maintenance.
This product is indoor flush mount photoelectric beam sensor.
PB-30SU is designed to fit with an outlet box (Japanese) without obtrusion.
It blends well in any residential, commercial or industrial applications.
In addition to flush mount, exposed installation by using exposed outlet box is available.
Installation hole
LED masking rivet
(Receiver only)
Transmission LED (Transmitter)
Alarm LED (Receiver)
｛
｛
｛
Window
Screw : 4 pcs.
Tapping screw : 4 pcs.
Terminals
Beam power selection switch [L-H] (Transmitter)
Alarm contact selectable switch [N.O.-N.C.] (Receiver)
2P (Transmitter)
6P (Receiver)
Horizontal angle
adjustment
Finder
Tamper switch
(Receiver only)
Vertical angle
adjustment screw
Installation hole
●
Remove obstacles that may
interrupt the beam.
●
Avoid strong light from the sun,
automobile headlights etc. shinning
on transmitter and receiver directly.
●
This product is for indoor
use only.
●
This product needs
1.57" (40mm) depth
from wall surface.
FRONT SIDE
COVER
Accessory
BACK SIDE
1.57"(40mm)
