Instruction Manual
Wide angle protection : PA-450EA
Wide angle protection : PA-450PIA (40 lbs PET IMMUNE)
PASSIVE INFRARED SENSOR
We appreciate your purchase of a TAKEX passive infrared sensor. This sensor will provide long and dependable service when properly
installed. Please read this Instruction Manual carefully for correct and effective use.
Please Note : This sensor is designed to detect intrusion and to initiate an alarm ; it is not a burglary-preventing device.
TAKEX is not responsible for damage, injury or losses caused by accident, theft, Acts of God ( including inductive
surge by lightning ), abuse, misuse, abnormal usage, faulty installation or improper maintenance.
[MAINTENANCE]
●
When the unit is soiled, clean the cover with a soft cloth moistened with a
small amount of cleansing solution. Do not use chemicals such as thinners
or alcohol.
●
Check operation once a week. Do not fail to check operation whenever furniture
in coverage area is moved.
●
The passive infrared sensor is designed to detect infrared energy variations
caused by the presence of a human body. Therefore, note that similar
variations in conditions in protection area, due to other reasons, may cause
the sensor to create an alarm as it is unable to distinguish the sources.
●
Install the sensor in a location such that intruders are more likely
to cross the protection zones, not to approach head on.
●
Do not install in a site which is subject to electrical noise or intense
vibration.
●
Avoid direct sunlight, spot light or intense reflections on the sensor
or the protection zone.
●
Do not install the sensor outdoors (indoor use only).
●
Do not install the sensor directly on the ceiling.
(For ceiling mount, use optional attachment BCW-401.)
2. DO'S AND DON'T'S
3. COVERAGE AND RANGE
1. PARTS DESCRIPTION
Cover
Wiring hole
(Knockout)
Lock screw
Terminals
Tamper
switch
Alarm LED
(Red)
Mode
selector
Mounting hole
(Knockout)
Lens
Index
Base
Cover lock screw
Recessed
Wiring hole
Exposed
wiring hole
Corner
mounting
hole
Back View
83.5mm(3.29")
76mm(3")
Vertical curtain protection : PA-460EA
[PA-450EA]
[PA-450PIA]
[PA-460EA]
Mounting hole
■
Wide Angle (PA-450EA)
unit : m (ft)
Factory Set
Factory Set
Side view
■
Vertical Curtain (PA-460EA)
■
Wide Angle (PA-450PIA)
Factory Set
PET IMMUNITY (PA-450PIA)
AREA ADJUSTMENT
Index
Matched to the
edge
Index
(60')
(50')
(40')
(30')
(20')
(10')
(10')
(20')
(30')
10m
18m
15m
5m
0
(8.2')
2.5m
(8.2')
2.5m
0
(10')
5m
(20')
10m
(30')
(40')
12m
0
5m
(40')
10m 12m
(8.2')
2.5m
4
°
9
°
20
°
35
°
52
°
80
°
7
°
14
°
32
°
65
°
84¡
7
°
14
°
30.8
°
49
°
65
°
84¡
(60')
(50')
(40')
(30')
(20')
(10')
10m
18m
15m
5m
0
(8.2')
2.5m
(60')
(50')
(40')
(30')
(20')
(10')
10m
18m
15m
5m
0
(8.2')
2.5m
(10')
(20')
(30')
0
5m
(40')
10m 12m
(8.2')
2.5m
(10')
(20')
(30')
0
5m
(40')
10m 12m
(8.2')
2.5m
16m(53’)
16m(53’)
BCW-401
Loosen the lock screw and
move the inner PCB upwards
by using the index as a guide
in order to shorten the
coverage of senor.
(PA-450EA,PA-460EA)
●
To maintain maximum pet immunity,
install the sensor 2.5m(8.2ft) from the
floor vertically without moving the
inner PCB (factory set).
●
Use the optional mounting bracket
"BCW-401" to optimize
the pet immunity
performance, when
area adjustment is
required.
