Cause
Solution
Bad wiring or connection via connector
Ensure correct wiring or connection.
Incorrect power supply/voltage
Ensure appropriate power supply/voltage.
Insufficient sensitivity
Increase sensitivity.
Inappropriate detection pattern
Reajust detection pattern.
Pattern depth covers door area
Eliminate door area from detection pattern.
Mounting part is distorted
Set environmenal level ajustment.
Something is moving within the detection pattern
Reajust detection pattern. Remove moving oblect.
Detection pattern covers passage
Reajust detection pattern.
Sensitivity is too high
Decrease sensitivity.
Select different frequency from other sensors.
Readjust presence timer to shorter time settings.
Yes
Angle
Row
<Maintenance>
Limited Warranty :
* When setting presence timer, the unit may
get in detection mode during selected time. It will
go back to normal operation later.
※
Specifications and design are subject to change without prior notice.
Current
Consumption
Output Contact
11
EXTERNAL DIMENTIONS
•To clean the device, use a soft, wet cloth and
then wipe off any water drops.If the device is
particularly dirty, dip the soft cloth in the water
that contains a weak neutral detergent. Wipe the
device gently with the cloth, then wipe off any
detergent that remains. Do not use substances
such as thinner or benzene.
(The plastic parts may deform, discolor or change
their properties.)
•Perform operation checks on a regular basis.
Output Holding Time
Ambient Temperature
Weight
DC50V 0.1A (Resistive load)
Approx. 0.5 sec
-20
℃ ～＋
60
℃
180 g
Silver (S)
DC 24V : 40 mA Max.
Dry contact relay output N.O.
AC/DC 12
～
110V
±
10% 50/60Hz
AC100V : 2.4 VA Max.
AC 12V : 1.7 VA Max.
AC 24V : 1.7 VA Max.
DC 12V : 80 mA Max.
Environmenal Level
Operation LED
Hunting door (Orange)
Reset wait (Orange:rapidly blinking)
Supply voltage
Normal/Level 1/Level 2/Level 3
Power-on/Standby (Green)
Derection (Red)
Wide / Narrow
2 sec / 10 sec / 60 sec /
∞
4 Frequency channels selectable
④
Problem
Door does not
operate
Detection window is covered with dust or water
droplets
Door sometimes
does not
operate
Door operates
by itself
(Hunting)
Door operates
without any
people
within detection
pattern
TAKEX products are warranted to be free from defects in material and workmanship for 12 months from original date of shipment. Our warranty does
not cover damage or failure caused by natural disasters, abuse, misuse, abnormal usage, faulty installation, improper maintenance or any repairs
other than those provided by TAKEX. All implied warranties with respect to TAKEX, including implied warranties for merchantability and implied
warranties for fitness, are limited in duration to 12 months from original date of shipment. During the Warranty Period, TAKEX will repair or replace,
at its sole option, free of charge, any defective parts returned prepaid. Please provide the model number of the products, original date of shipment
and nature of diffculty being experienced. There will be charges rendered for product repairs made after our Warranty Period has expired.
Detection pattern overlaps with other Active IR
sensors
After cleaning with a soft cloth dipped in a weak
neutral detergent, wipe off water droplets.
If normal operation cannot be restored by these means, contact either the dealer from whom you bought the unit or
TAKEX directly.
Pattern Depth
Motion & Presence Sensor
Active near infrared
0°/
+5°
There are sudden changes in detection pattern
・
Getting dirty
・
Putting/removing door mat, etc
・
Footprint on snow
Cover color
9
TROUBLESHOOTING
10
SPECIFICATIONS
1 row to 4 rows
Product
Max 3.0m
Detection system
Installation height
Sensivity Adjustment
Patter Width
Presence Timer
Frequency
(Unit : mm)
(Standard mounting pitch)
