![background image](http://html.mh-extra.com/html/takeuchi/tcr50/tcr50_operators-manual_814666108.webp)
106
MAINTENANCE
Replacing the Hydraulic Oil
Return Filter
WARNING
�
Stop the engine and allow the machine
to cool down before performing
maintenance.
• The engine, hydraulic lines and many
other parts of the machine are hot
directly after the engine is stopped.
Touching these parts will cause
burns.
• The hydraulic fluid is also hot and
under high pressure.
Be careful when loosening caps and
plugs. Working on the machine under
these conditions could result in burns
or injuries due to the hot oil spurting
out.
�
Oil may spurt out if caps or filters are
removed or pipes disconnected before
releasing the pressure in the hydraulic
system.
• When removing plugs or screws or
disconnecting hoses, stand to the
side and loosen slowly to gradually
release the internal pressure before
removing.
�
If you must work beneath the raised
dump body, securely engage the raised
body prop. Never get under the dump
body if it is not sufficiently supported.
1. Start and run the engine at low speed.
2. Fully raise the dump body.
3. Set the safety lock lever to the lock
position, and stop the engine.
4. Securely engage the raised body prop.
After First 50 Hours (New Machines Only)
5. Remove the cover (4).
6. Remove the air breather (2).
7. Using a filter wrench, turn the return filter
(8) counterclockwise and remove it.
8. Clean the filter installation surface on the
filter stand.
9. Apply a thin layer of oil to the packing of
the new filter.
10. Install the new return filter by hand.
11. Tighten 3/4 more turn with the filter
wrench after the filter packing comes in
contact with the surface of installation.
12. Inspect the level with the sight gauge (1),
and replenish if the level is low.
Refer to page 103 “Inspecting the
Hydraulic Oil Level and Replenishing”.
13. Tighten the air breather (2).
S2G033
H
M
L
1
4
2
S2G041
8
Содержание TCR50
