14 / 21
Command Name
Format
Argument
Return value
Explanation
Shade Control
shade=N<CR>
0:OFF
OK
Shade control mode
Mode
1:ON
Getting/setting
2:Data out
(Note.4)
3:Data in
4:Data all in
5:Auto shade for gain
6:Auto shade for offset
7:ON(offset only)(Note.6)
shade[?]<CR>
Non
0:OFF
1:ON
2:Data out
3:Data in
4:Data all in
5:Auto shade for gain
6:Auto shade for offset
7:ON (offset only)(Note.6)
Gain/Offset
shd_go=N<CR>
0:OFF
OK
Target value
1:Gain
Getting/setting
2:Offset
(Note.3)
shd_go[?]<CR>
Non
0:OFF
1:Gain
2:Offset
Pixel Address
shd_ad0=N<CR>
N:0-255
OK
Correction targeted pixel
(Lower)
(The lower address）
shd_ad0[?]<CR>
Non
0-255
Getting/setting
(Note.2)
Pixel Address
shd_ad1=N<CR>
N:0-255
OK
Correction targeted pixel
(Upper)
(The upper address）
shd_ad1[?]<CR>
Non
0-255
Getting/setting
(Note.2)
Value set
shd_dat=N<CR>
N:0-255
OK
Data value setting
shd_dat[?]<CR>
Non
0-255
Data value getting
Taget Level for
shd_to=N<CR>
N:0-255
OK
Correction targeted level
black level
Getting/setting
shd_to[?]<CR>
Non
0-255
for black level.
(Note.2)
Taget Level for
shd_tg=N<CR>
N:0-255
OK
Correction targeted level
gray level
Getting/setting
shd_tg[?]<CR>
Non
0-255
for gray level.
(Note.2)
Data set
shd_set<CR>
Non
OK
Data set
EEPROM load
shd_epld<CR>
Non
OK
EEPROM all load
EEPROM save
shd_epsv<CR>
Non
OK
EEPROM all save
EEPROM clear
shd_epcl<CR>
Non
OK
EEPROM all clear
Note.2: Correction targeted pixel address: [shd_ad1] x 256 + [shd_ad0]
Note.3: Gain or Offset has to be chosen before using "Data set" command.
Note.4: When setting “shade” to 2, the setting status is output as is the case in video signal from Video out port.
Note.5: Only the value of EEPROM is cleared. RAM is not cleared.
Note.6: When setting “shade” to 7,the gain doubles.
S
H
A
D
E