COPY
‑ 1 ‑
Apr./28/ 06
Instruction Manual for Mikuni VM26 Carburetor Kit
・
Thank you for purchasing one of our TAKEGAWA's products. Please strictly follow the following instructions in installing and using the products.
・
Before fitting the products, please be sure to check the contents of the kit. Should you have any questions about the products, please kindly contact
your local motorcycle dealer.
Please read the following before starting the installation
◎
We do not take any responsibility for any accident or damage whatsoever arising from the use of the products not in conformity with the instructions
in the manual.
◎
We shall be held free from any kind of warranty whatsoever of products other than this product if the glitch takes place on the other products than
this one after the installation and use of this product.
◎
This carburetor kit is for exclusive use in our own bore-up kit and bore-stroke up kit. This kit is not compatible with a stock engine or a stock head.
◎
Do the installation work correctly referring to the relative Honda’s genuine service manual for the above-mentioned applicable models with frame
numbers.
◎
This kit is designed for exclusive use in the above-mentioned applicable models and frame numbers only. Please take note that this kit cannot be
mounted on other models.
◎
You are kindly requested not to contact us about the combination of our products with other manufacturers'.
◎
Setting of a carburetor needs to be adjusted depending on the natural phenomena like the weather, temperatures, and motorcycles and carburetors
themselves. Arrange the setting to match the engine and other conditions. For your information, the carburetor is shipped out in a state described on
page 2.
◎
This kit does not use a stock throttle housing. You are requested to prepare a brake lever, etc by yourself.
◎
As this product is designed for exclusive use in the closed racing, do not drive on the public road with this kit installed on the motorcycle.
◎
Please be informed that, mainly because of improvement in performance, design changes, and cost increase, the product specifications and
prices are subject to change without prior notice.
◎
This manual should be retained for future reference.
Item No.
：
０３―０５―０４８３
Applicable Models and Frame Nos:
Monkey / Gorilla
：
Z50J-2000001
〜
：
AB27-1000001
〜
・
Work only when the engine and muffler are cool. (Otherwise, you will burn yourself.)
・
Prepare right tools for the work. (Otherwise, the installation with improper tools could cause breakage of parts or injuries to yourself.)
・
Always use a torque wrench to screw bolts and nuts tight and securely to the specified torque.
(Improper torque could cause these parts to get damaged or fall off, resulting in accidents.)
・
As some products and frames have sharp edges or protruding portions, please work with your hands protected.
(Otherwise, you will suffer injuries.)
・
Before riding, always check every section for slack in parts like screws. If you find slack ones, screw them securely up to the specified
torque. (Otherwise, improper tightening may cause parts to come off.)
・
Always use new gaskets, and packings. And check those parts to be reused for wear and damage. If you find worn or damaged parts,
replace them with new ones.
The following show the envisioned possibility of injuries to human bodies and property damage as a result of disregarding the
following cautions.
Caution
・
Always start the engine in a well-ventilated place, and do not turn the engine on in an airtight place.
(Otherwise, you will suffer from carbon monoxide poisoning.)
・
When you notice something abnormal with your motorcycle while riding, stop riding immediately and park your motorcyle in a safe place.
(Otherwise, the abnormality could lead to accidents.)
・
Before doing work, make sure your bike is secure on level ground for safety's sake.
(Otherwise, your motorcycle could overturn and injure you while you are working.)
・
Check or carry out maintenance of your motorcycle correctly according to the procedures in the instruction manual or service manual.
(Improper checking or maintenance could lead to accidents.)
・
If you find damaged parts when checking and performing maintenance, do not use these parts any longer, and replace them with new ones.
(The continued use of these damaged parts could lead to accidents.)
・
As gasoline is highly flammable, never place it close to fire. Make sure that nothing flammable is near the gasoline. Since vaporized accumulation
of gasoline is at high risk of explosion, work in a well-ventilated place. (It may cause a fire.)
The following show the envisioned possibility of human death or serious injuries to human bodies as a result of disregarding the
following cautions.
Warning
◎
Please note that, in some cases, the illustrations and photos may vary from the actual hardware.
