COPY
/2
02-02-203,06-08-69
2020.7.4
Master Cylinder Instruction manual
◎ The use ignoring the instructions that are written in the manual, if the accident or damage has occurred, we can not assume any responsibility for
compensation.
◎ This product installation and use, when a problem occurs to after market goods, guarantee other than this product, also can not assume any in any
such matters.
◎ If it was the case or mounting that has been processed like a product, it will not be covered under warranty.
◎ It is not possible to inquire of the combination of other manufacturers.
◎ It’s doesn’t have an oil level check window. Please check the amount of brake fluid on the upper limit line of the oil cup.
◎ In addition, this manual are intended for those who have a basic skills and knowledge.
If no experience of mounting, etc., who preparation of such a tool is insufficient, we recommend that it is your request to the shop with a
technical credit.
■ When performing the work, etc., be sure during the cold (when the engine and the muffler is cold). (It may cause burns.)
■ When performing the work, it should be made to prepare the tools for the job. (Breakage of parts, it may cause injury.)
■ When using a blade etc, protect your hands and handle with care.（It may cause injury.）
■ Do the work must always specified torque using a torque wrench. (Damage of bolts and nuts, and cause of dropout.)
■ The product and the frame, might have edges or protrusions. Please go to protect your hands when you work. (It may cause injury.)
■ Be sure to each part inspection before operation, check the loosening of the threaded portion, be sure to securely tighten the specified torque
if there is loose. (It may cause detachment of the parts.)
■ Be careful that the brake fluid does not contact your skin. After work, wash your hands thoroughly with water. Otherwise, you will have a rough skin.
■ Please handle the brake fluid with great care, because the brake fluid, if spilled on painted surfaces, resin parts, or rubber products, will deteriorate or
damage these parts. If the fluid is spilled on these parts, wash them immediately with water. Otherwise, the spilled portions will deteriorate or get damaged.
■ Please use only the specified brake fluid. Don not use the different brands of brake fluids together. Otherwise, the mixed use of the brake fluids
will cause technical troubles or chemical reaction.
■ During operation, when an abnormality occurs, immediately stop the vehicle in a safe place, please stop running. (It may lead to an accident.)
■ Plastic bags of product packaging, you can either be stored in a place that is out of reach of children, it should be discarded.
(When the children or wearing, there is a risk of suffocation.)
■ When performing the work, do the work safely stabilize the vehicle in a horizontal location.(There is a risk of injury vehicle collapsed while working.)
■ Get the brakes installed by a skilled mechanic at facilities with special instruments and tools.（Otherwise, the wrong installation will cause accidents.）
■ Inspection, maintenance, the instruction manual or, inspection methods such as service manuals, to protect the way, should be done correctly.
(unsuitable inspection and maintenance, there is a risk that result to an accident.)
■ When carrying out the inspection and maintenance, etc., if found damaged parts, replace the damaged parts to avoid possible to reuse the parts.
(There is a risk that lead to accidents Continued use.)
◎ With the foreseeable incidents in mind, we have listed up these precautions for your correct use of the products and for the prevention of dangers
or damages to you and other people. We do request you to take these important safety precautions against dangers.
②
①
Number
Product content
Quantity
Item Number
Master cylinder ASSY.
2
Turn signal sub-wiring（HONDA Type-）
37600-KCZ-T00
A
B
記号
Product content
Quantity
Item Number
A
Brake lever(Black）
06-08-60L
B
Brake lever(Silver）
02-0-027
C
Handle bracket
06-08-62
D
Brake switch
00-06-02
Item parts
D
C
※ Photo: front brake master cylinder.
Handle pipe diameter
Type
Piston diameter
Mirror screw diameter
Product number
22.2mm
Clutch master cylinder
2.7mm
M8（Clockwise screw）
02-02-203
Front brake master cylinder
mm
06-08-69
CONTACT Address : 3-5-6 Nishikiorihigashi Tondabayashi Osaka JAPAN
TEL: +8-72-25-357 FAX:+8-72-24-5059 e-mail:[email protected] URL http://www.takegawa.co.jp
Please contact with your name and country name provided. (Only English please)
☆ Please read carefully before use ☆
Thank you very much for purchasing our products.Thank you so you will comply with the following matters at the time of use.
Before installation, please check your always kit contents.If there is a point of notice event, Please contact us the dealer of purchase.
◎ If the description, such as photos or Illustration different with this part.
Caution
When the handling of ignoring this display, property damage and human shows the assumption of what injury.
Warning
When the handling of ignoring this display people died, shows the contents of the serious injury possibility is
assumed.
◎ Please note. Performance up, the design change, the product and the price in the cost up, etc. are subject to change without notice.
◎ Please be informed that we shall be held harmless against any claim against us whatsoever arising out of use of the products in racing and the like.
◎ Keep this manual stored until this product is discarded.
Product content
※ Please order in the repair parts are always repair part number.
If it is not the part number order, you may not be able to order.
Please be forewarned.
It should be noted, In the case of parts that can not be separately shipment,
please order a set part number.
