TAKASAGO HX-S-G2 Series, Инструкция по эксплуатации

Страница: 49 / 240

Useful Function
49
The approximate time of high speed, medium speed, and low speed is as follows:
- CV High Speed: Approx. 10 msec - CC High Speed: Approx. 10 msec
- CV Medium Speed: Approx. 100 msec - CC Medium Speed: Approx. 100 msec
- CV Low Speed: Approx. 200 msec - CC Low Speed: Approx. 200 msec
The approximate time of high speed, medium speed, and low speed is as follows:
- CV High Speed: Approx. 100 msec - CC High Speed: Approx. 10 msec
- CV Medium Speed: Approx. 300 msec - CC Medium Speed: Approx. 100 msec
- CV Low Speed: Approx. 500 msec - CC Low Speed: Approx. 200 msec
Setting contents will be confirmed when the FUNC. key is pressed.
Any change of setting item without pressing the FUNC. key is not set.
Startup Mode Selection
* This function can be set for full-featured type "model name with F" only.
Allows you to select the optimal output startup properties for each use.
1. Constant Voltage (CV) Priority Mode (High/Medium/Low speed)
Perfect when using as a normal constant voltage power supply for testing equipment and devices.
2. Constant Current (CC) Priority Mode (High/Medium/Low speed)
Perfect when wishing to control the current of the load such as electromagnets etc. or when wishing to include the
constant current pulse to nonlinear loads such as diodes etc.
Setting Procedures
Press the Function “FUNC.” key.
The FUNC. lamp will light.
The Setting Item Number will be displayed in the Number Display
(voltage) and the parameter will be displayed in the Number
Display (current).
Select Item number 1 with the VOLTAGE dial.
Select 0 to 6 with the CURRENT dial.
Set Value 0 = Constant Voltage (CV) Priority High Speed Mode
Set Value 1 = Constant Voltage (CV) Priority Medium Speed Mode
Set Value 2 = Constant Voltage (CV) Priority Low Speed Mode
Set Value 4 = Constant Current (CC) Priority High Speed Mode
Set Value 5 = Constant Current (CC) Priority Medium Speed Mode
Set Value 6 = Constant Current (CC) Priority Low Speed Mode
Press the FUNC. key again to set
Setting contents will be confirmed and the "Number Display"
returns to measurement display.
MEMO (30V/60V)
MEMO (500V/1000V)
MEMO