TAKASAGO HX-S-01000-12G2, Инструкция по эксплуатации

Страница: 50 / 240

Useful Function
50
Variable Slew Rate
* This function can be set for full-featured type
"model name with F" only.
Sets the increasing and falling rate for each
output voltage and output current individually.

Constant Voltage (CV) Slew Rate
Use when a small transition rate is desired in the
output voltage when using constant voltage.
Range
：
30V Type
：
0.01V/S – 60.00V/S
60V Type ： 0.1V/S – 120.0V/S
120V Type
：
0.1V/S – 240.0V/S
400V Type ： 0.1V/S – 800.0V/S
500VType
：
1V/S – 1000V/S
1000VType
：
1V/S – 2000V/S

Constant Current (CC) Slew Rate
Use when a small transition rate is desired in the
output voltage when using constant current.
Range
The range will vary for the Constant Current (CC) Slew Rate depending on the number of parallel devices.
Rated Output Current
[Io]
Range Resolution
Io < 50A
0.01 to (Twice the constant output current) A/s
0.01A
50A

Io < 500A
0.1 to (Twice the constant output current) A/s
0.1A
500A

Io < 4000A
1 to (Twice the constant output current) A/s
1A
(Ex) 200A (6kW) type: 0.1A/s to 400.0A/s (Resolution 0.1A/s)
Setting Procedures
Press the Function “FUNC.” key.
The FUNC. lamp will light.
The Setting Item Number will be displayed in the Number Display
(voltage) and the parameter will be displayed in the Number
Display (current).
Select Item number 1 with the VOLTAGE dial.
Assign the Startup Priority Mode by setting the parameter to 3
or 7 with the CURRENT dial.
Set Value 3=CV Priority, Variable Slew Rate
Set Value 7=CC Priority, Variable Slew Rate
①
CV Slew Rate Rising
②
CV Slew Rate Falling
V
o
lt
a
g
e
(
V
)
→
①
△ Ｖ
△ ｔ
①
②
②
△ Ｖ
△ ｔ
Time (s)
→
Example of Slew Rate Settings in CV Priority Mode
Slew Rate (CV) =
（
V/S
）
△ｔ
△Ｖ