43
Maintenance
Shower head
Flat gasket
(consumable supply)
Spray nozzle
Surface to clean
(front and rear surfaces)
Rotate and remove the shower head,
and remove the two parts
(spray nozzle, flat gasket).
Clean (wash) the spray nozzle.
１
２
Reassemble the shower head.
３
Take care not to forget the flat gasket.
Side shower head
Side shower head
- Clean the water spray plate once a week.
- Use an item such as a toothbrush to
remove any dirt such as water scale within
the holes where the water is output from
the spray nozzle.
Counterclockwise:
Removed
Clockwise: Attached
Neck cushion, head pillow
At the end of work each day, wash the neck cushion and head pillow with water, wipe them dry with a
towel, and allow them to dry in the shade.
If they are extremely dirty, wash with detergent diluted with water, and rinse carefully with water.
The neck cushion and head pillow are consumable supplies. Replace them if they are extremely dirty or
the surface has deteriorated. (available at additional cost)
Caution
- If solvents drip onto the neck cushion or head pillow, rinse with water as soon as
possible. Failure to follow this instruction may cause deformation or discoloration.
- Clean the neck cushion and head pillow every day. Leaving dirt uncleaned may
cause them to get moldy.