Safety Precautions (Be sure to observe them)
Notes for Use
3
Recline the chair at the end of the day
Lower the seat and fully recline the backrest after the work
of the day. Doing this can ease the load on the springs and
the cylinders, and extend the product life.
Do NOT put things other than people on the seat
The maximum load is 1350 N (135 kgf). The raising speed
may become slow if the load is nearly the maximum.
Putting things other than people may cause deformation,
tearing, or corrosion of the upholstery.
Do NOT clean using chemicals or apply heat
If any chemicals are splashed on the upholstery or the pump cover, wipe off the
chemical immediately. Splashed chemicals may cause discoloration or deterioration.
Care must be taken when operating switches
Use automatic operation after confirming safety around the chair
Do NOT put things on the power cord
Please be careful, as the headrest will come off when
raised too high
Do NOT pound or scrape the equipment
When operating the headrest, take care to prevent your fingers
and other body parts from being caught in the space around the
operation lever or pinched between the headrest and the backrest
When the circuit breaker (the power switch) is often
thrown, please call the service center
If water or chemical solutions have been splashed on the chair, wipe it off immediately
Chemical solution may make a stain or if the solution is splash
Doing so may result in a falling accident or cause malfunction.
ed on the electrical
components, it may result in malfunction or electrical leakage. If water or chemical
solutions has adhered to the chair, wipe it off immediately with a dry, soft towel, etc.
Do not put things on the power cord. It may damage the cord
resulting in electric shock or fire due to disconnection or short.
Doing so may lead to the destruction or malfunction of the
cover or other such parts.
Operators must take care of people around the chair. Before
operating the chair, let them know the chair is going to be
operated.
Before using automatic operation, confirm the customer is sitting on the designated
sitting area of the chair. During operation, keep watching the customer.
Conduct inspection paying attention to backlash,
wobble, tilt, vibration, sound, heat and smell
When feeling any abnormality, stop using the chair immediately,
unplug the power cord, and contact your dealer or us.
Caution
When wiping, strong disinfectants that corrode metal
(povidone-iodine (isodine solution) or sodium
hypochlorite, etc.) must never be used
Make sure that there are no people’s hands, feet, or
obstructions between the step and floor when raising,
lowering, or rotating the chair
Turn off the power switch after using the chair
Do NOT let persons weighing 135kg or more sit in the chair
Be sure to turn on or off the power switch by hand
Before operation, confirm that every part is working
normally and safely
Watch your step so that you aren’t caught by the
power cord
Doing so may lead to malfunction.
