Takara Belmont EX-ESYMZ, Руководство по эксплуатации

Страница: 8 / 12

8
Maintenance
Conduct the after-use care and always keep this product clean for later use.
Leaving dirt uncleaned may cause them to get moldy or smell.
Conduct dry wiping using a soft, dry cloth.
Resin component
For severe stains
Wipe using a soft cloth dipped in neutral detergent diluted ten times with water, then wipe with
water, then wipe with a dry cloth thoroughly.
Maintenance of various components
The metallic parts or mechanical structure of this product has sharp edges. Pay attention
to avoid hurting the hands or fingers when cleaning.
Caution
- Turn off the power switch and pull off the power plug when conducting maintenance.
There is a risk of electrical shock or ignition. Furthermore, an unexpected action of this
product may cause an injury.
- Do not splash water for washing. There is a risk of failure or electrical shock.
Warning
When restarting the use of this product after not using for a certain period, clean before using.
After cleaning, be sure to confirm normal operation of this product.
- Never use the following substances:
The volatile chemicals, such as thinner, alcohol, remover, gasoline, and kerosene, acid, alkaline or chloric
detergents, antiseptic solution strongly corrosive to metals (Providone Iodine, sodium hypochlorite, etc.),
waxes containing abrading agent, sponges containing abrading agent, etc.
- Do not use brushes, scrubbers, etc., for maintenance. It may leave scratches or stains.