Do not use this product if the coating
is peeling.
Replace the water taps if the coating is peeling.
continuing to use this product when the coating
is peeling may cause injury.
Do not spray areas except for the
basin with water.
z
Take care not to spray areas other than the
basin with water. If water does come in contact
with areas other than the basin, wipe them dry as
soon as possible. Water entering the main body
may cause malfunctions or a ground leakage fire.
7
Caution
Do not use the product in a place
where freezing is expected.
Failure to take this precaution may result in
breakage of parts, thus resulting in water leaks.
Repair of breakage due to freezing will result in
fees being charged even during the warranty
period. If freezing is expected, maintain the room
temperature at 0
Υ
or above by using a heater.
Do not drink the hot water.
This product is designed for washing hair.
Do not drink the hot water.
Do not touch the hot water supply
pipe or mixing pipe.
The hot water supply pipe or mixing pipe may
become very hot. Do not touch the pipes directly.
Only use this product for its intended
purpose and do not use it for
non-hairdressing work.
This product is an industrial product designed for
barbers and hair salons. Only use this product for
its intended purpose and do not use it for
non-hairdressing work.
Do not use outdoors.
This product is designed for indoor use. Do not
install this product outdoors or within a vehicle.
Be sure to only use this product inside barbers or
hair salons. Failure to follow this instruction may
cause malfunctions or damage to the product.
Do not subject the unit to shocks.
Do not subject the unit to shocks. Failure to
follow this instruction may cause damage,
leading to injury.
Do not turn the water fully on with the
shower head in the shower head bracket.
Failure to follow this instruction may cause water
to spill out of the basin, covering the customer
with water. When turning the water on with the
shower head in the shower head bracket, check
the surrounding area and turn the water stop
knob slowly.
z
Take care not to allow water to drip on the floor.
If water does drip on the floor, wipe it dry as soon
as possible. Failure to follow this instruction may
damage the floor, or cause water leakage.
Warning
Adjust the water temperature while
checking the temperature by hand.
When adjusting the temperature of the water,
reduce the volume of water, point the shower
head away from the customer and check the
temperature by hand. Take care when doing so,
as hot water may come out of the shower head.
Disassembly and
repairs/modifications are prohibited.
Disassembly, repairs and modifications must not
be conducted by people other than qualified
repair technicians.
Disassembly
Prohibited
Do not use hot water (boiling water)
of 60 °C
or higher.
Using hot water of 60 °C or higher may deform or
damage the parts such as the basin, shower head
and water stop knob.
CAUTION
Hot water
Do not climb on this product.
Do not lean on the basin.