5. Install the footrest.
3
Install the footrest
Install the footrest
Adjusting the adjuster height
①
Insert the footrest bracket into the hole of the footrest mount.
②
Slide the footrest bracket to the back until it hits the stoppers.
③
Lower the footrest.
④
Make sure the footrest is level.
①
③
Footrest mount
Footrest bracket
②
Positioning stoppers
• After installing the footrest, make sure that the footrest bracket is firmly hooked to
the footrest mount and that the footrest is kept level. Failure to do so may result in
injury.
• Be careful when lifting and carrying the footrest, and of where you place it because
the footrest is heavy. Dropping the footrest could result in injury or damage the floor.
When adjusting the height of the adjuster, make sure that the adjuster does not rub on
the floor or catch the power cord when the chair is rotated. On the contrary, adjust the
height so that the product does not fall over even if the customer gets on the footrest at
exit/entry position.
The adjuster, which prevents the chair from tipping over, is located on the underside of the footrest.
Adjusting the adjuster height
①
Loosen the adjuster nut with wrench (opposite side
17mm) by turning it counterclockwise.
②
Adjust the height by rotating the adjuster.
counterclockwise
➡
highten clockwise
➡
shorten
③
Fasten the adjuster nut with wrench (opposite side
17mm) by turning it clockwise.
Adjuster nut
Shorten
Highten
Adjuster
CAUTION
WARNING
