3. Connect the power plug with the outlet.
Prepare a outlet with an attached ground terminal.
※
110/120 V AC (12 A or more), 220/230/240 V AC (7 A or more)
<If assembling together with the Yume Swing bowl>
2. Attach the rubber ring to the base.
Rubber ring
Base
4. Check that the chair operates normally.
Turn the power on and check that the chair raises/lowers normally, the backrest raises/reclines
normally, the legrest raises/lowers normally, and the rotation lock/release, preset feature,
and auto-return features operate normally.
Installation Manual
The chair must absolutely be grounded
in order to prevent electric shock.
Lock rotation at the Yume Swing setting position where the Yume Swing position setting and the
bowl position are optimally aligned. At that position, manually align the positions of the chair and
bowl, and set the preset setting. After completing the setting, return the chair to its original position
by using the auto-return switch, and use the preset switch to check the set position.
Determine the installation location. Lift the base off the floor and attach the rubber ring to the
rim of the base.
●It is easier to attach the rubber ring by lifting up one side of the chair at a time. Hold the
armrest and shoulder part of the backrest to balance the force, and tilt the chair body to
attach the rubber ring one side at a time. Do not apply excessive force to the armrest or other
parts, or strike it from above when tilting the chair body.
Be sure to ground the chair to prevent accident due to
current leakage and to improve the noise-dampening
performance of the control circuit.
Takara Belmont has no responsibility for any current
leakage that results if the above-indicated procedures are
not performed.
2