SETTING UP THE TRIPOD
EXTENDING THE LEGS
Before spreading the legs apart, extend them to the desired
length, this will prevent tipping due to uneven leg extension.
To extend the legs, flip open the leg locks, pull the leg
extensions out, and flip closed the leg locks. Only work on one
leg lock at a time. Once all the legs are at the same length,
spread the legs apart to your chose angle.
Once the tripod is set up and the legs secured, several
adjustments can be made. These changes should be made
with extra care if the camera is mounted on the tripod.
HEIGHT
The center column can be raised and lowered. First loosen the center
column screw, then slide the column to raise or lower the center column.
Finish by tightening the center column screw.
ADJUSTABLE CENTER COLUMN
(Illustration 3)
To release the center column, turn the center column locking knob
counterclockwise, adjust it to desired height, and then lock the column
by rotating the knob clockwise.
Now is also a good time to check that all the leg locks are tightened
before you put any equipment on the tripod.
On uneven surfaces and terrain, you can extend the legs to different
heights so that the camera is level and also stable.
Содержание FLIP-ZIP
Страница 1: ...TAKP4H58 FLIP ZIP ...
Страница 8: ......