- 44 -
OPTIONAL ITEMS
1. TM-RE30 Temperature Remote Controller
The TM-RE30 Temperature
Remote Controller has two
functions. It allows the output
temperature from the T-M50 to
be adjusted within the range of
100 °F to 185 °F, and it also
works as a diagnostic tool that
will give a concise error code whenever there is a
problem with the unit. The temperature options are
100°F, 105°F, 110°F, 115°F, 120°F, 125°F, 130°F,
135°F, 140°F, 145°F, 150°F, 155°F, 160°F, 165°F,
170°F, 175°F, 180°F and 185°F. See the trouble
shooting section for information on possible error
codes.
7. TM-MC01 Multi system controller
The TM-MC01 is the multi-
system controller for the T-
M50. This can control a
maximum of 10 T-M50’s,
from 15,000 BTU to
3,800,000 BTU. It also
works as a diagnostic tool
that will give a concise error
code whenever there is a
problem with the unit. Usage
of the TM-MC01 requires
having the TM-RE30.
3. TM-BF50 Vent Damper
The TM-BF50 Vent Damper
prevents the backflow of air
through the exhaust vent. This
helps prevent harmful exhaust
gases from entering the home, as
well as helping to prevent the unit
from freezing in areas where cold
air can be blown or drawn into the
exhaust system. Install this vent
damper in accordance with
Takagi’s installation instructions, and any applicable
codes.
4. TM-VC50 Vent Cap
The TM-VC50
Vent Cap is for
outdoor installation
with the T-M50
water heater. The
cap is installed on
the top of the unit,
instead of
connecting an exhaust vent pipe. The cap will
prevent any debris that might be in the
environment from entering the unit and causing
damage or a fire hazard, as well as preventing
rain or other weather from entering the unit.
5. TM-DV50 Direct Vent Kit
This kit can be used convert
the T-M50 from a conventional
vent system to a direct vent (or
sealed combustion) system.
This is a CSA tested
conversion kit. Install this
conversion kit in accordance
with Takagi’s installation
instructions and any applicable
codes.
6. TM-PC50 Pipe cover
The TM-PC50 Pipe cover
protects the plumbing pipes
to the T-M50 from
unexpected adjustments.
This pipe cover is fixed to the
bottom of the T-M50, which
hides the plumbing and
improves the visual aspects
of the whole installation for the water heater.
