- 40 -
OPTIONAL ITEMS
1. TM-RE30 Temperature Remote Controller
The TM-RE30 Temperature
Remote Controller has two
functions. It allows the output
temperature from the T-K3/T-K3-
Pro to be adjusted within the
range of 99 °F to 185 °F, and it
also works as a diagnostic tool that will give a
concise error code whenever there is a problem
with the unit. The temperature options are 99°F,
100°F, 102°F, 104°F, 106°F, 108°F, 110°F, 111°F,
113°F, 115°F, 117°F, 122°F, 131°F, 140°F, 149°F,
158°F, 167°F, 176°F and 185°F. See the trouble
shooting section for information on possible error
codes.
2. TK-BF01 Backflow preventer
The TK-BF01 Backflow
preventer prevents the backflow
of air through the exhaust vent.
This helps prevent harmful
exhaust gases from entering the
home, as well as helping to
prevent the unit from freezing in areas where
cold air can be blown or drawn into the
exhaust system. Install this vent damper in
accordance with Takagi’s installation
instructions, and any applicable codes.
3. TK-TV04 Vent Cap
The TK-TV04 Vent Cap
is for outdoor installation
with the T-K3/T-K3-Pro
water heater. The cap is
installed on the top of the
unit, instead of
connecting an exhaust
vent pipe. The cap will prevent any debris that
might be in the environment from entering the
unit and causing damage or a fire hazard, as
well as preventing rain or other weather from
entering the unit.
4. TK-TV10 Direct venting kit
This kit can be used
convert the T-K3/T-
K3-Pro from a
conventional vent
system to a direct
vent (or sealed
combustion) system.
This is a CSA tested
Takagi conversion kit. Install this conversion kit
in accordance with Takagi’s installation
instructions and any applicable codes.
5. TK-PC01 Pipe cover
The TK-PC01 Pipe cover
protects the plumbing pipes to
the T-K3/T-K3-Pro from
unexpected adjustments. This
pipe cover is fixed to the bottom
of the T-K3/T-K3-Pro, which
hides the plumbing and improves
the visual aspects of the whole installation for
the water heater.
6. TK-RB01 Recess box
The TK-RB01 will allow for
“clean” installations. The T-
K3/T-K3-Pro fits inside the
recess box, which hides and
protects the whole water
heater and plumbing. The
TK-RB01 fit between most
wall studs.
7. TK-KPWL4 and TK-KPWH4 T-Vent Wall thimble with Termination
These terminations are used when venting out through the wall and
are compatible with the T-Vent pipe system.
These terminations are special stainless steel vents for gas
appliances and are UL listed as Category II, III and IV. There are
two types of terminations: the Louver termination and the Hood
termination. For different wall thicknesses, there are 3 ranges of
lengths available (refer to the T-Vent brochure for details).
Install these vent terminations in accordance with Takagi’s
installation instructions and any applicable local codes.
TK-KPWL4
Louver
Termination
TK-KPWH4
Hood
Termination
Содержание T-K3
Страница 48: ... 48 44R018 1 M 001 TK3 TK3PRO 0 ...
