in an emergency, but also life-saving.
9. If you want to have best performance with minimum ventilation events on the prop the use of a
Permatrim hydrofoil plate
is highly recommended. Made from marine aluminum, these hydrofoil
plates quadruple the outboard's anti-ventilation plate and significantly reduce ventilation. In
addition, they stabilize the handling of the inflatable boat as a fixed trim panel with their lateral
fins.
Specification – T340LS (Slim)
•
Length/Width: 3,40 x 1,36m
•
Draft: 0,2m
•
Tube Diameter: 0,42m
•
Max. Tube Pressure: 250mbar
•
Max. Floor Pressure: 680mbar
•
Max. Person: 3
•
Max. Loading: 355kg
(including engine)
•
Max. Engine Power: 7,35KW / 10HP
•
Max. Engine Mass: 50kg
•
Length of Shaft: S
•
CE Design Catagory: C
All information contained herein has been compiled with the utmost care and to the best of our knowledge.
Nevertheless, mistakes can not be completely ruled out. For this reason, TAKACAT (Friedel Hacker - Dipl.-
Ing.) has been made to point out that they do not assume any warranty or legal responsibility or any liability
for consequences resulting from incorrect information can. The specifications of the products which
TAKACAT distributes and / or offers as a dealer were taken over by the respective manufacturer. TAKACAT
accepts no liability for their accuracy. Maximum figures apply under optimal conditions (environment,
system configuration, software, etc.). We are always grateful for the notification of any errors. Changes and
errors excepted.
General Importer:
TAKACAT
Inh. Friedel Hacker (Dipl.-Ing.)
Leibnizstraße 3
53498 Bad Breisig (Germany)
Tel.: +49 2633-200360
Fax: +49 2633-200361
© TAKACAT – Friedel Hacker (Dipl.-Ing.)
Page 4