www.takacat.com
Takacat Owner’s LX Series Manual - 2022
13. After launching your boat into the water, check the pressure in the hulls to verify
you still have 3 psi hull air pressure. If the water is cooler than the air
temperature, the air inside the hulls will condense causing a pressure drop.
Use the manual pump to inflate back to 3 psi hull pressure if needed.
Well done – now you are set up with your new Takacat.
Cleaning
Instructions
Rinse your boat with clean fresh water whenever possible after each use.
At the end of each season it is recommended you wash it with Takacat Boat wash or
a soapy water (plant based) and fully rinse after. We recommend the Takacat Boat
Wash and cleaners. Let it fully dry before rolling the boat up and putting it back in its
storage bag.
Store your boat inside the storage bags provided and in a dry place.
Important – DO NOT use a vinyl preserving agent on fabric surfaces. Chemicals in
such agents will dry out the fabric and this will void any warranty.
Repair
Instructions
We do not include adhesive with our repair kit. Be sure to purchase pvc boat adhesive
to complete your repair kit.
Follow the repair instructions on the adhesive packaging or look for better instructions
online via you tube or contact
for more details.
For larger repairs, we recommend you take your Takacat to a local inflatable boat
service centre.
