www.takacatasia.com
Takacat Owner’s Manual - 2020
12. If you opted for the Quick Release Wheels, install them now in the down
position. When in the down position, the wheels provide enough heigh to mount
a 15” short shaft outboard in the upright position.
Note – Wheels are side specific so please make sure you mount them with the
tyres facing inward when in the down position to prevent friction damage to the
boat hulls
Please note: that all Takacat models are designed to be use with a short
shaft (15” shaft) outboard only.
13. If you opted for the Quick Release Rod Holder, install them now into the
Upper Transom Bar.
14. After launching your boat into the water, check the pressure in the hulls to verify
you still have 3 psi hull air pressure. If the water is cooler than the air
temperature, the air inside the hulls will condense causing a pressure drop.
Use the manual pump to inflate back to 3 psi hull pressure if needed.
Well done – now you are set up with your new Takacat.
