In order to change the memory location, move the cursor using the jog
5. Calling the design at the machine
dial.
Press the SET Key two times.
y
Data transfer starts from the USB Linker
Data transfer starts from the USB Linker.
About 5 second later, you will hear a sound from the control panel.
Then you can prepare or start the operation.
Remarks.
e a s
1. In case of Serial connection, please check the initial setting
of the communication speed (9600/19200/38400bps) in the
“TAJIMA User’s Manual” of each machine.
2.
When you change the communication speed, please
change the DIP switch setting of the CPU card of the
g
g
machine.
3. For more details, please see the TAJIMA “User’s Manual“ of
each machine.
TAJIMA USB Linker Manual
29
