TAJIMA TFMX-IIC, Руководство пользователя

Страница: 173 / 268

To return the frame to the original position
159
Chapter 6
1
2
3
4
5
6
7
8
9
10
11
(4)
To execute after thread trimming
3-4.
To memorize frame origin (Frame origin memory)
Frame origin is an anchoring point (X:0.0, Y:0.0) to calculate the current frame position. Position of frame
origin differs depending on model.
Execute this function in case of the following condition.
(1) There is a possibility that the frame was moved by hand in the state of power OFF or during sleep mode
in such a case as changing frame.
(2) After installation of software
(3)
When frame driver is changed
(4) When frame type is changed
When a frame origin is wrong, the following troubles will occur.
Frame coordinates are not displayed correctly.
The frame does not return to the interrupted position even after performing Power resume.
Position of frame limit gets out of alignment.
3-4-1.
Explanation on the screen
Pressing SET will perform thread
trimming and move the frame.
ATH
6(7 6(7
X: 0.0
Y: 0.0
Frame origin
Embroidery space
SET
9 Frame Origin Memory
F2
Frame Origin Memory
: Not to execute
: To execute