TAJIMA TCMX 601, Руководство пользователя, Страница: 39 / 130

4-12
Basic operation
3.
Operating by using a jog remote-controller (option)
1.
Selection of frame travel mode................................................
2.
Frame travel.............................................................................
6.
Setting for the number of revolutions
Set the number of revolutions (max revolution) that is suitable for the
design to embroider.
When changing the number of revolutions
during operation: p.3-6
1.
To call the screen......................................................
2.
To set ................................................................. End
Switching the screen
Main screen ....................
(twice)
Other setting • operation.
When the LED lamp lights, it will become possible to
perform operation.
When you do not use the jog remote-controller, store it
in a jog remote-controller pocket, etc. not to move the
frame carelessly.
Lit
Frame travel speed can be changed by angle of
inclination of the stick.
The number of revolutions will change automatically
according to stitch length of design data with setting the
value here as the upper limit.
It is not possible to set this value exceeding “Max Revolution
Limit” (p.9-4).
[rpm]
700
1 Max Revolution
250 to 800 (rpm)
C
CM
List screen
C
1 Max Revolution
Press ?
650
Example: 650 (rpm) E
A D2 F1 F6
JZ07