TAJIMA TCMX 601, Руководство пользователя

Страница: 27 / 130

3-8
Operation panel
7.
Setting of a memory card
To perform the following operations, set the memory card (after
inserting the memory card to the adapter).
Input of design data (memory card) (p.4-4)
Memory Card Processing (Save) (p.7-12)
Memory Card Processing (Delete) (p.7-13)
CAUTION
Insert a memory card to the adapter slowly and
carefully. Insertion of a memory card with force
could result in breakage.
Do not pull out a memory card forcedly. Pulling
out the memory card forcedly could result in
breakage.
Wait for 15 seconds or more when inserting and
pulling out a memory card.
Do not insert or take out the memory card during
operation of the machine (when the main shaft
motor and/or frame move, or in the middle of color
change).
Insert the adapter to the slot (inserting inlet) in a
direct line. Oblique insertion will cause the
adapter to interfere with the inner card, which
could break the card.
Insert the adapter slowly and carefully. Insertion
with force may cause the adapter not to be taken
out even if the eject button is pressed, which
could cause the adapter to be broken.
Wait for five or more seconds after inserting the
adapter, and then start operation.
Do not pull out the adapter forcedly. If the adapter
is pulled out forcedly, it could be broken.
Wait for 15 seconds or more when inserting and
pulling out an adapter.
Do not insert or take out the adapter during
operation of the machine (when the main shaft
motor and/or frame move, or in the middle of color
change).
Memory card
Eject
button
To take out the adapter, press the eject button.
Adapter
1
2
Insert a memory card to the adapter, and then set
that adapter to the slot for memory card.
Slot for
memory card
!
!
!
!
!
!
!
JZ07