Taiyo Electric Goot RX-852AS Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 36

background image

TAIYO ELECTRIC IND.CO.,LTD.

8

3

Rules for Safe Operation

1. DO NOT USE IN DANGEROUS ENVIRONMENTS.

Do not use the soldering station in damp or wet locations or expose it to

external environmental conditions, particularly rain. Never use it in an explosive
atmosphere. The heat from the heater can ignite fumes. Be sure that the work area
is well ventilated.

2. KEEP CHILDREN AND BYSTANDERS AWAY FROM THE SOLDERING STATION.

Do not let bystanders touch the soldering station. All bystanders should be kept a

safe distance from the work area.

3. USE FOR THE RIGHT JOB.

Your soldering station is an electrical tool used to solder parts and melt solder. Do

not use the soldering station for any other purpose. For example: The soldering
station should never be used to warm water or other liquids.

4. WEAR PROPER APPAREL, SAFETY GLASSES, GLOVES AND MASK.

Do not wear loose clothing (such as a necktie). Tie up long hair. Clothing or hair

can burn on contact with the tip or surrounding heated parts.

5. CONNECT TO THE SPECIFIED AC POWER SUPPLY.

The power voltage for this soldering station is indicated at the back of the control

unit. Never plug the soldering station into any other voltage.

6. DO NOT ABUSE THE POWER CORD AND INSPECT IT PERIODICALLY.

Never yank the power cord to disconnect it from the receptacle. Keep the power

cord away from heat, oil and sharp edges. If it is damaged, contact the nearest
distributor to order a new one.

WARNING

The

RX-852AS

is an anti-static model. Be sure to

properly ground the soldering station using a grounded
receptacle to prevent electric shocks and anti-static. If
it is not properly grounded, electric shocks will occur. As
the soldering station uses conductive materials, please
be careful not to touch any electrical power source or a
serious injury will result.

«
...
6
7
8
9
10
...
»

Содержание Goot RX-852AS





































Отзывы:

Нет отзывов

Похожие инструкции для Goot RX-852AS

Бренд: Etneo Страницы: 4

Бренд: Etneo Страницы: 13

Бренд: Pace Страницы: 14

Бренд: jbc Страницы: 4

Бренд: jbc Страницы: 30

Бренд: jbc Страницы: 16

Бренд: jbc Страницы: 24

Бренд: jbc Страницы: 20

Бренд: jbc Страницы: 16

Бренд: WJG Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды