GWT-NEOS3000AE VER1.0
NEOS3000 S
ERIES
3
U
SER
M
ANUAL
4.
LED Status Indicators
Position
LED Color
LED Activity
Description
1
RED
Continuous ON or OFF
The DC power is ON or OFF
2
YELLOW
Continuous ON
The PSTN line is idle.
2
YELLOW
Flashing(0.05sec ON / 0.05sec OFF)
The PSTN line is talking.
3
GREEN
Continuous ON
The GSM phone is idle.
3
GREEN
Flashing(0.05sec ON / 0.05sec OFF)
The GSM line is talking.
3
GREEN
Flashing(0.25sec ON / 0.25sec OFF)
The redial tone of NEOS.
3
GREEN
Flashing(0.5sec ON / 0.5sec OFF)
The busy tone of NEOS.
4
GREEN
Continuous OFF
The engine is OFF, in SLEEP, ALARM
4
GREEN
Flashing(0.6sec ON / 0.6sec OFF)
No SIM card, no PIN entered, network searching
4
GREEN
Flashing(0.075sec ON / 3sec OFF)
Logged on a network but no call in progress
4
GREEN
Continuous ON
Connected to remote party
2&3
GREEN and YELLOW Flashing three time in one second
Enter the Setup Mode
2&3
GREEN and YELLOW Flashing(0.25sec ON / 1.75sec OFF)
Enter the Programming Mode
E.
HOW TO USE
1.
Pick up your telephone handset.
2.
Listen for dial tone. (If there is no tone, you have to check the signal level of GSM engine.)
3.
Dial the phone number.
F.
PROGRAMMING MODE
1.
Pick up the telephone handset and listen for the dial tone. Press the
【＊＊＊＊＃】
then enter the
setup mode. You can hear the Du Du Du tone (three times per second).
2.
Press the password to enter programming mode, the default value is
【
1234
＃】
2-1.
When the password is correct, the green LED and yellow LED of NEOS will flash and you
hear short Du tone (one time per second). We call it setup tone.
2-2.
When the password is wrong, the green LED and yellow LED of NEOS will flash and you
hear three Du tones then back to the setup mode.
3.
In programming mode you can press the function code to program the feature you want. (check
the table of function code)
3-1.
If the programming is successful, the green LED and yellow LED of NEOS will flash one
time and you can hear one Du tone. You can program the other function.
3-2.
If the programming is fail, the green LED and yellow LED of NEOS will flash three times and
you can hear three Du tones. If you hear setup tone, you can reprogram the function
3-3.
You can hang up the handset to cancel this programming when you press wrong code.
3-4.
Press
【＊＊００＃】
or hang up the handset over two second if you want to quit the
programming mode.
