Taiwan Electrical & Electronic Manufacturers NEOS3000-3G, Руководство пользователя

Страница: 9 / 12

NEOS3000A-3G COMBINED Ver. 1 Page: 9/12
6. Factory Default Setting
Press
【
999
】
to enable the default setting.
G. INSTALLITION TIPS
1.
Make sure that GSM engine logged to a network. Check the receive signal strength and move
the antenna until you achieve the best signal possibly.
2. RF energy from GSM engine may affect the other standard telephone equipment. Don’t place
the NEOS beside equipment too close.
3. When you connect NEOS with PABX, please notice the polarity of PSTN line.
4. Please disable the PIN entered of SIM card. Disable the feature of call waiting, call forwarding
and voice mail.
H. FUNCTION CODE TABLE
Feature Function Code Description
Setup Mode
＊＊＊＊＃
Enter the setup mode
＊＊００＃
Escape the setup mode and enter normal mode
Password
0XXXX
＃
Set the password. It is up to 8 digits. The default is set
〞
1234
＃〞
.
913 Disable to press password
914 Enable to press password. It is default.
Outgoing Time
Control
900 Disable outgoing time control
90X Set the outgoing time. X is 1 to 9 minutes.
911
Disable NEOS to cut the call when outgoing time is up. But NEOS
will emit the reminding tone per minute
912 Enable NEOS to cut the call when outgoing time is up.
Call Restriction
915 Disable limiting dial. It is default.
916 Enable limiting dial.
Permissible
Dialing Number
80XXXXXXXX
＃
Add the prefix number.
70XXXXXXXX
＃
Delete the prefix number.
998 Clear all permissible dialing number.
Outgoing Tone
927 Disable
928 Enable
Polarity Reversal
963 Disable polarity reversal of outgoing. It is default.
964 Enable polarity reversal of outgoing
967 Disable polarity reversal of incoming. It is default.
968 Enable polarity reversal of incoming.
Receive Volume 53X X is 0 to 4. Adjust the receive volume of engine.
Reset Default 999 Enable the default setting
Factory Default
setting
Password is
〞
1234
＃〞
.
Outgoing time is not limited.
Disable limiting dial